| |
Dimblock & Cubydimm
DIMBLOCK is a fully digital controlled 12 x 2,5[kW] dimmer.
The dimmers designed by Theater Technisch Lab are extremely compact, light-weight, and have excellent low-noise performance. Remarkable is the outstanding good heat management. With Theater Technisch Lab dimmers you are sure of the highest quality and for every lighting project you always have a space, weight and cost efficient solution. Installment possibilities under installation dimmers.
DimBLOCK is the biggest member of the group of portable digital dimmers.
 
 
Features:
- isolated DMX input (NEUTRIK connectors)
- RMS current measurement
- electronic short circuit protection
- electronic overload protection
- 3 phase fed system power
- temperature monitor
- blower monitor
- mains monitor with buzzer indication and automatic down in case of failures
- channel preset setting with led indication
- channel non-dim setting with led indication
- active ceramic fuse sensing with alarm
- status menu with diagnostic channel data: DMXin, Load
- channel test button
- triac & drivers placed in sockets
- choice of 7 curves per dimmer, incl. non-dim
- user interface with LCD (liquid crystal display)
- GJC= Generator Jitter Compensation: prevents disfunction if powered by a portable generator
- three years guarantee
Specifications:
- Capacity (T-Ambience max. 32[0C]): 22[kW]
- Min. channel load 15[kW]
- Max. channel load 2,5[kW]
- Mains: CEE-form 32[A]-380/400[V], 3P+N+E, 45 to 62[Hz]
- Dimensions: 386x240x140[mm]
- Weight: 9,3[kg]
- Housing: 2,5[mm] aluminium
Dimbox 12 is a digital 'one phase' 12-fold dimmerpack. There are two designs: portalbe and wall-mounted. The portable type is well suited for small theatre productions, bands, exhibitions. The wall-mounted type fits well in architectural environment: shops, musea etc.
DimBOX12 is based on the same electronic design as dimBLOCK and dimmypack: electronic power management based on RMS current measurement. It guarantees an overload free operation, which prevents any component stress. DimBOX12 can handle a 1[kW] channel load and a total pack load of 7,2 kW (by mains 32A). This design is extremely noiseless because of the absence of a blower.
The user interface of dimBOX12 is the same as the interface of the other Theater Technisch Lab dimmers. There is one remarkable difference: you can create and store scenes directly on the dimBOX. And you can play back those scenes with a remote preset controller. This means in some situations you don't need a seperate lighting control desk.
 
Features:
- isolated DMX input (NEUTRIK connectors)
- memory for 7 scenes (set of channel levels)
- directly play back scenes from memory dimmer with remote preset controller
- RMS current measurement
- electronic short circuit protection
- electronic overload protection
- temperature monitor
- channel pre-heating with led indication
- channel non-dim setting with led indication
- active ceramic fuse sensing with alarm
- status menu with diagnostic channel data: DMXin, Load
- channel test button
- 40[A] triacs protected against voltage spikes
- triac & drivers placed in sockets
- choice of 7 curves per dimmer, incl. non-dim
- user interface with LCD (liquid crystal display)
- GJC= Generator Jitter Compensation: prevents disfunction if powered by a portable generator
- three years guarantee
Specifications:
- Capacity (T-Ambience max. 32[0C]): 7,2[kW]
- Min. channel load 15[W]
- Max. channel load 1[kW]
- Mains: 16/32[A], 230[V], 45-62[Hz]
- input: MIDI / Remote Preset Controller/ RS232
- output: RS232
- 40[A] triacs
- Dimensions: 410x205x125[mm]
- Weight: 7.4[kg]
- Housing: 2,5[mm] aluminium
Flatpack R2 to dimm ALL kind of lamps
FLATpack is a DMX512 steered, 16-fold short circuit proof dimmer, based on dimming with IGBT. The maximum load for each dimmer is 220[W], and the total pack load is 3500[W].
FLATpack is designed to drive inductive and capacitive loads, which makes it suitable to dim almost ALL light sources. Smoothly it will dim lamps with conventional trafo's as well as lamps with electronic trafo's, standard halogen lamps, LED lines, LED fluorescent light and LED bulbs and, the just new on the market, 230volt Acriche LEDs.
This makes FLATpack the solution when you need dimmed interior light in an DMX steered environment. For example in theatres, exhibition halls, museums, film studio's, cinema's, disco's and architectural lighting.
On the front panel you can set the DMX-address and select a control curve for each dimmer with the aid of a three digit led display and some push buttons. All settings are stored permanently in memory.
Easy installation: with five 8-pole WAGO cage clamp connectors (included in the delivery). Easy use: all instructions on front panel.
FLATpack is fully digital- and a 100% printed circuit board design; there are no internal wirings. It comes in a flat (height=49[mm]) aluminium housing.
 
Features:
- 16 dimmers in one package
- Meant for all kinds of load, included 230[V] LED's
- Output can be set parallel
- Outputs internal protected against overload (spikes) and short-circuit
- 9 different control curves selectable per dimmer: smooth 11-bits fade
- 3-digit led display for setting and displaying the DMX address and control curves
- DMXin/through on 5-pole Neutrik PCB mounted connectors (no internal wiring)
- DMX512 input galvanic isolated, fail save for open input and protected against over voltage.
- Led indication for DMX512 present
- Over temperature sensing per dimmer, with warning led and read out on led display
- Temperature control by means of a electronically controlled blower
- Blower failure check
Specifications:
- Dimmer load: maximum 220[W], inductive and capacitive load
- Total package load 3500[W] @ max. T-environment=32[Celsius]
- Outputs on five 8-pole WAGO connector's serie 231. Cable part with strain relief will be included.
- Mains inlet: 3-pole 16[A], 230[V] Euro connector
- Dimensions 416x140x47[mm]
- Weight 1.75[kg]
POWER-DAC8-TL
PowerDAC8 TL is primarily designed to control dimmable electronic ballast (from PHILIPS, OSRAM, and HUCO) with DMX512 instead of 1-10V. There for it has an analogue output of 0-10V and a power switch, both controllable by the same DMX channel. The power switch is meant to switch the mains power of the ballast. The power switches have a hybrid structure; a snubberless triac handles the switching current and a relay the steady current. Switching action takes place at mains zero voltage crossing. Because of that all, each channel can control for example 18 ballasts with 50W lamps. One must realize that an electronical ballast can create an inrush current of about 20A. Read the ballast specification for that!
powerDAC8-TL can also be used as a DMX controlled switchpack with an additional demultiplexer. By internal jumper you can change settings, see features
 
Specifications:
- DMX address setting: with led display and push buttons
- ANALOGUE-out:
- on WAGO cage clamps 0.08-0.75mm2
- sink/source capacity 20[mA]
- adjustable 0-10[V] or 0-370[uA]
- MAINS: 3P+N+E or 1P+N+E
- DMX-input: 5 pole XLR male, NEUTRIK PCB- mounted
- DMX-through: 5- pole XLR female, NEUTRIK PCB- mounted
- DMX-switching threshold selectable through jumper-settings: 2% or 50%
- Power switches on Wago cage clamps, 0.08-2.5mm2, two clamps on each switch, leakage current 40[uA], switching current 200[A], switch action at mains zero crossing, nominal current 16[A], internal fused by 12.5[A] / slow, can set potential free by removing fuses
Features:
- Galvanically isolated DMX-in, fail safe for open and shorted input
- Drives ohmic -, inductive - and capacitive loads
- By internal jumper setting you can:
- select two DMX levels for the switching point of the power switches,
- set to hold DMX data upon loss of DMX signal or not,
- select a special control curve for the analog output,
- DMX channel sharing for the corresponding power switch and analog output or not,
- skip the triac switch action from the power switch or not
- All components are PCB mounted
Pricelist: Theatertechnisch Lab & ETC Dimmers Lightcontrollers
|
